| Product model |
Type 100 refiner |
| Filter |
100 mesh |
| Product weight |
about 16kg |
| Material |
stainless steel + aluminum polishing |
| Motor power |
750w |
| Wheel diameter |
100mm |
| Motor speed |
2800 rpm |
| Machine size |
22*22*61CM |
| Product function |
soy milk, tofu, bean dregs, etc. |
description
Automatic filtration and separation of slag slurry high quality motor, high speed rotation exquisite craftsmanship, fine grinding shock absorption, anti-skid, anti-static and antistatic
Operating instructions:
1. Soaking materials:
Remove iron, sand and other debris from the material; soak material in hot water until there is no hard core. (Note: soaking the material with high temperature water can cause high viscosity and poor slag effect).
2. Start:
Loosen the lock nut and adjust the handle to turn in the coarse direction until there is no block when the filter frame exposed by the slag opening is slightly pushed. The rotation is flexible and the engine can be started.
3. Adjust the gap:
Adjust the handle in a thin direction until you hear a light massage. Do not fit too well, too well to grind bean skin, block the filter mesh, appear in the slag with pulp, and significantly reduce production efficiency, increase energy consumption. If the gap is too large, the slag rate is too high, which also results in low productivity and waste materials. To further improve the utilization rate of the dregs, bean feces can be adjusted to the porridge by adding water to the hopper, and processing can be repeated.
4. Cleaning:
At the end of the work, the filter and the waste of the machine must be cleaned in time to guarantee a good separation of slag and hygiene.
Methods As below:
1. Unscrew the fixing screws of the dispenser, remove the filter frame, move the grinding wheel, etc. and the filter should be cleaned without obstruction.
2. Clean the inside and outside of the machine with a cloth. Do not wash with water to prevent the engine from entering the water.
3. Refer to the structure diagram to restore the relevant parts as the filter frame in order, and clamp them with tightening bolts
FAQ:
Q1 Is your company a trading one or a factory?
Factory and trade (we have our own factory site.)
Q2 Can the voltage of the machine be adapted ?
A: We can adapt the machine to your needs to match your local voltage.
Q3 Can you ship the machine to my address?
A:Yes, we support Express, sea shipping and air transportation, as well as door-to-door service.
Q4 Can | go to China and visit your factory?
A: Sure, welcome to our factory.
Q5 DO you have English Manual for each machinery?
A: Yes. The instruction manual, the test report and other Data Sheets related shall be provided by US.
Q6 What's your Minimum Order Quantity?
A: Any order quantity is warmly welcomed.
Q7.Does your company accept customization?
We have excellent design team, and we accept customized.
(ZEYU)
Audited Supplier 
){kind=link}
){kind=link}