Product parameter
Product model: Type 100 refiner
Filter: 100 mesh
Product weight: about 16kg
Material: stainless steel + aluminum polishing
Motor power: 750w
Wheel diameter: 100mm
Motor speed: 2800 rpm
Machine size: 22*22*61CM
Product function: soy milk, tofu, bean dregs, etc.
Operating instructions:
1. Soaking materials:
Remove iron, sand and other debris from the material; soak material in hot water until there is no hard core. (Note: soaking the material with high temperature water can cause high viscosity and poor slag effect).
2. Start:
Loosen the lock nut and adjust the handle to turn in the coarse direction until there is no block when the filter frame exposed by the slag opening is slightly pushed. The rotation is flexible and the engine can be started.
3. Adjust the gap:
Adjust the handle in a thin direction until you hear a light massage. Do not fit too well, too well to grind bean skin, block the filter mesh, appear in the slag with pulp, and significantly reduce production efficiency, increase energy consumption. If the gap is too large, the slag rate is too high, which also results in low productivity and waste materials. To further improve the utilization rate of the dregs, bean feces can be adjusted to the porridge by adding water to the hopper, and processing can be repeated.
4. Cleaning:
At the end of the work, the filter and the waste of the machine must be cleaned in time to guarantee a good separation of slag and hygiene. Methods As below:
1. Unscrew the fixing screws of the dispenser, remove the filter frame, move the grinding wheel, etc. and the filter should be cleaned without obstruction.
2. Clean the inside and outside of the machine with a cloth. Do not wash with water to prevent the engine from entering the water.
3. Refer to the structure diagram to restore the relevant parts as the filter frame in order, and clamp them with tightening bolts;
Delivery way:
1.If you choose "seller's shipping Method" or "ocean freight" we will help you to arrange the shipment by sea and deliver to your nearest seaport! - If CFR by sea, that means, after arriving destination seaport, the buyer need to pay the destination port charges (such as terminal handling charges, documents charges, storage charges, ect), tax to do the customs clearance and pick up the goods by yourself.
2.If you choose "By Express " we will help you to arrange the shipment by international express (such as DHL / TNT/ FEDEX /ARAMEX, ECT) and directly deliver to your address (DOOR TO DOOR SERVICE)! If shipment by express, after arriving , the buyer only need to pay tax and assist shipping company to do the customs clearance is ok.
3.If you choose " By Air " we will help you to arrange the shipment by airplane and deliver to your nearest airport! after arriving the airport , the buyer need to pay tax to do the customs clearance and pick up the goods by yourself.
please note :
1. If the product is updated, we will send the latest style. The appearance may change, but the parameters and functions remain unchanged.
2. If the production process of mechanical products requires welding. There will be slight welding traces at the welding point. This is normal, not a flaw. If you mind, please place your order carefully. or contact the seller to check the detailed picture.
3. All machine size and weight measured by our hands,maybe have some deviation,please don't minds (MENG)
Product parameter
){kind=link}